View GAL16V8B-5LPI_3287050.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

specifications gal16v8 1996 data book 3-65 1 10 11 20 i/clk i i i i i i i i gnd vcc i/o/q i/o/q i/o/q i/o/q i/o/q i/o/q i/o/q i/o/q i/oe 5 15 functional block diagram features pin configuration ? high performance e 2 cmos ? technology 5 ns maximum propagation delay fmax = 166 mhz 4 ns maximum from clock input to data output ultramos ? advanced cmos technology ? 50% to 75% reduction in power from bipolar 75ma typ icc on low power device 45ma typ icc on quarter power device ? active pull-ups on all pins ?e 2 cell technology reconfigurable logic reprogrammable cells 100% tested/guaranteed 100% yields high speed electrical erasure (<100ms) 20 year data retention ? eight output logic macrocells maximum flexibility for complex logic designs programmable output polarity also emulates 20-pin pal ? devices with full func- tion/fuse map/parametric compatibility ? preload and power-on reset of all registers 100% functional testability ? applications include: dma control state machine control high speed graphics processing standard logic speed upgrade ? electronic signature for identification description the gal16v8c, at 5 ns maximum propagation delay time, com- bines a high performance cmos process with electrically eras- able (e 2 ) floating gate technology to provide the highest speed performance available in the pld market. high speed erase times ( < 100ms) allow the devices to be reprogrammed quickly and ef- ficiently. the generic architecture provides maximum design flexibility by allowing the output logic macrocell (olmc) to be configured by the user. an important subset of the many architecture configu- rations possible with the gal16v8 are the pal architectures listed in the table of the macrocell description section. gal16v8 devices are capable of emulating any of these pal architectures with full function/fuse map/parametric compatibility. unique test circuitry and reprogrammable cells allow complete ac, dc, and functional testing during manufacture. as a result, lattice semiconductor guarantees 100% field programmability and functionality of all gal products. in addition, 100 erase/write cycles and data retention in excess of 20 years are guaranteed. plcc gal 16v8 dip gal16v8 top view 2 20 i/clk i i i i i i i i gnd vcc i/o/q i/o/q i/o/q i/o/q i/o/q i/o/q i/o/q i/o/q i/oe 4 6 8 9 11 13 14 16 18 i/clk i i/o/q i i/o/q i i/o/q i i/o/q i i/o/q i i/o/q i i/o/q i i/o/q clk 8 8 8 8 8 8 8 8 oe olmc olmc olmc olmc olmc olmc olmc olmc programmable and-array (64 x 32) i/oe gal16v8 high performance e 2 cmos pld generic array logic? copyright ? 1996 lattice semiconductor corporation. e 2 cmos, gal, ispgal, isplsi, plsi, pds, silicon forest, ultramos, l with lattice semiconductor corp. and l (stylized) are registered trademarks of lattice semiconductor corporation (lsc). the lsc logo, generic array logic, in-system programmability, in-system programmable, isp, ispate, ispcode, ispdownload, ispgds, ispstarter, ispstream, isptest, ispturbo, latch-lock, pds+, rft, total isp and twin glb are trademarks of lattice semiconductor corporation. isp is a service mark of lattice semiconductor corporation. all brand names or product names mentioned are trademarks or registered trademarks of their respective holders. lattice semiconductor corp., 5555 northeast moore ct., hillsboro, oregon 97124, u.s.a. 1996 data book tel. (503) 681-0118; 1-888-isp-plds; fax (503) 681-3037; http://www.lattice.com
specifications gal16v8 1996 data book 3-66 gal16v8 ordering information commercial grade specifications blank = commercial i = industrial grade package power l = low power q = quarter power speed (ns) xxxxxxxx xx x x x device name _ p = plastic dip j = plcc gal16v8c gal16v8b part number description ) s n ( d p t) s n ( u s t) s n ( o c t) a m ( c c i# g n i r e d r oe g a k c a p 5 . 775 0 3 1i p l 7 - c 8 v 6 1 l a gp i d c i t s a l p n i p - 0 2 0 3 1i j l 7 - c 8 v 6 1 l a gc c l p d a e l - 0 2 0 10 17 0 3 1i p l 0 1 - b 8 v 6 1 l a gp i d c i t s a l p n i p - 0 2 0 3 1i j l 0 1 - b 8 v 6 1 l a gc c l p d a e l - 0 2 5 12 10 10 3 1i p l 5 1 - b 8 v 6 1 l a gp i d c i t s a l p n i p - 0 2 0 3 1i j l 5 1 - b 8 v 6 1 l a gc c l p d a e l - 0 2 0 23 11 15 6i p q 0 2 - b 8 v 6 1 l a gp i d c i t s a l p n i p - 0 2 5 6i j q 0 2 - b 8 v 6 1 l a gc c l p d a e l - 0 2 5 25 12 15 6i p q 5 2 - b 8 v 6 1 l a gp i d c i t s a l p n i p - 0 2 5 6i j q 5 2 - b 8 v 6 1 l a gc c l p d a e l - 0 2 0 3 1i p l 5 2 - b 8 v 6 1 l a gp i d c i t s a l p n i p - 0 2 0 3 1i j l 5 2 - b 8 v 6 1 l a gc c l p d a e l - 0 2 ) s n ( d p t) s n ( u s t) s n ( o c t) a m ( c c i# g n i r e d r oe g a k c a p 534 5 1 1 8 v 6 1 l a g5 - cp l p i d c i t s a l p n i p - 0 2 5 1 1 8 v 6 1 l a g5 - cj l c c l p d a e l - 0 2 5 . 775 15 18 v 6 1 l a gcp l 7 - p i d c i t s a l p n i p - 0 2 15 18 v 6 1 l a gcj l 7 - c c l p d a e l - 0 2 5 1 1p l 7 - b 8 v 6 1 l a gp i d c i t s a l p n i p - 0 2 5 1 1j l 7 - b 8 v 6 1 l a gc c l p d a e l - 0 2 0 10 17 5 1 1p l 0 1 - b 8 v 6 1 l a gp i d c i t s a l p n i p - 0 2 5 1 1j l 0 1 - b 8 v 6 1 l a gc c l p d a e l - 0 2 5 12 10 15 5p q 5 1 - b 8 v 6 1 l a gp i d c i t s a l p n i p - 0 2 5 5j q 5 1 - b 8 v 6 1 l a gc c l p d a e l - 0 2 0 9p l 5 1 - b 8 v 6 1 l a gp i d c i t s a l p n i p - 0 2 0 9j l 5 1 - b 8 v 6 1 l a gc c l p d a e l - 0 2 5 25 12 15 5p q 5 2 - b 8 v 6 1 l a gp i d c i t s a l p n i p - 0 2 5 5j q 5 2 - b 8 v 6 1 l a gc c l p d a e l - 0 2 0 9p l 5 2 - b 8 v 6 1 l a gp i d c i t s a l p n i p - 0 2 0 9j l 5 2 - b 8 v 6 1 l a gc c l p d a e l - 0 2 industrial grade specifications
specifications gal16v8 1996 data book 3-67 output logic macrocell (olmc) the following discussion pertains to configuring the output logic macrocell. it should be noted that actual implementation is ac- complished by development software/hardware and is completely transparent to the user. there are three global olmc configuration modes possible: simple , complex , and registered . details of each of these modes are illustrated in the following pages. two global bits, syn and ac0, control the mode configuration for all macrocells. the xor bit of each macrocell controls the polarity of the output in any of the three modes, while the ac1 bit of each of the macrocells controls the input/output configuration. these two global and 16 individual architecture bits define all possible configurations in a gal16v8 . the information given on these architecture bits is only to give a better understanding of the device. compiler soft- ware will transparently set these architecture bits from the pin definitions, so the user should not need to directly manipulate these architecture bits. the following is a list of the pal architectures that the gal16v8 can emulate. it also shows the olmc mode under which the gal16v8 emulates the pal architecture. pal architectures gal16v8 emulated by gal16v8 global olmc mode 16r8 registered 16r6 registered 16r4 registered 16rp8 registered 16rp6 registered 16rp4 registered 16l8 complex 16h8 complex 16p8 complex 10l8 simple 12l6 simple 14l4 simple 16l2 simple 10h8 simple 12h6 simple 14h4 simple 16h2 simple 10p8 simple 12p6 simple 14p4 simple 16p2 simple compiler support for olmc software compilers support the three different global olmc modes as different device types. these device types are listed in the table below. most compilers have the ability to automati- cally select the device type, generally based on the register usage and output enable (oe) usage. register usage on the device forces the software to choose the registered mode. all combina- torial outputs with oe controlled by the product term will force the software to choose the complex mode. the software will choose the simple mode only when all outputs are dedicated combinatorial without oe control. the different device types listed in the table can be used to override the automatic device selection by the software. for further details, refer to the compiler software manuals. when using compiler software to configure the device, the user must pay special attention to the following restrictions in each mode. in registered mode pin 1 and pin 11 are permanently configured as clock and output enable, respectively. these pins cannot be configured as dedicated inputs in the registered mode. in complex mode pin 1 and pin 11 become dedicated inputs and use the feedback paths of pin 19 and pin 12 respectively. because of this feedback path usage, pin 19 and pin 12 do not have the feedback option in this mode. in simple mode all feedback paths of the output pins are routed via the adjacent pins. in doing so, the two inner most pins ( pins 15 and 16) will not have the feedback option as these pins are always configured as dedicated combinatorial output. registered complex simple auto mode select abel p16v8r p16v8c p16v8as p16v8 cupl g16v8ms g16v8ma g16v8as g16v8 log/ic gal16v8_r gal16v8_c7 gal16v8_c8 gal16v8 orcad-pld "registered" 1 "complex" 1 "simple" 1 gal16v8a pldesigner p16v8r 2 p16v8c 2 p16v8c 2 p16v8a tango-pld g16v8r g16v8c g16v8as 3 g16v8 1) used with configuration keyword. 2) prior to version 2.0 support. 3) supported on version 1.20 or later.
specifications gal16v8 1996 data book 3-68 registered mode in the registered mode, macrocells are configured as dedicated registered outputs or as i/o functions. architecture configurations available in this mode are similar to the common 16r8 and 16rp4 devices with various permutations of polarity, i/o and register placement. all registered macrocells share common clock and output enable control pins. any macrocell can be configured as registered or i/o. up to eight registers or up to eight i/o's are possible in this mode. dedicated input or output functions can be implemented as subsets of the i/o function. registered outputs have eight product terms per output. i/o's have seven product terms per output. the jedec fuse numbers, including the user electronic signature (ues) fuses and the product term disable (ptd) fuses, are shown on the logic diagram on the following page. registered configuration for registered mode - syn=0. - ac0=1. - xor=0 defines active low output. - xor=1 defines active high output. - ac1=0 defines this output configuration. - pin 1 controls common clk for the registered outputs. - pin 11 controls common oe for the registered outputs. - pin 1 & pin 11 are permanently configured as clk & oe. combinatorial configuration for registered mode - syn=0. - ac0=1. - xor=0 defines active low output. - xor=1 defines active high output. - ac1=1 defines this output configuration. - pin 1 & pin 11 are permanently configured as clk & oe. note: the development software configures all of the architecture control bits and checks for proper pin usage automatically. dq q clk oe xor xor
specifications gal16v8 1996 data book 3-69 registered mode logic diagram dip & plcc package pinouts 1 2 3 4 5 6 7 8 9 11 12 13 14 15 16 17 18 0000 0224 0256 0480 0512 0736 0768 0992 1024 1248 1280 1504 1536 1760 1792 2016 19 xor-2048 ac1-2120 xor-2049 ac1-2121 xor-2050 ac1-2122 xor-2051 ac1-2123 xor-2052 ac1-2124 xor-2053 ac1-2125 xor-2054 ac1-2126 xor-2055 ac1-2127 28 24 20 16 12 8 4 0 ptd 2128 2191 oe olmc olmc olmc olmc olmc olmc olmc olmc syn-2192 ac0-2193
specifications gal16v8 1996 data book 3-70 complex mode in the complex mode, macrocells are configured as output only or i/o functions. architecture configurations available in this mode are similar to the common 16l8 and 16p8 devices with programmable polarity in each macrocell. up to six i/o's are possible in this mode. dedicated inputs or outputs can be implemented as subsets of the i/o function. the two outer most macrocells (pins 12 & 19) do not have input ca- pability. designs requiring eight i/o's can be implemented in the registered mode. all macrocells have seven product terms per output. one product term is used for programmable output enable control. pins 1 and 11 are always available as data inputs into the and array. the jedec fuse numbers including the ues fuses and ptd fuses are shown on the logic diagram on the following page. note: the development software configures all of the architecture control bits and checks for proper pin usage automatically. combinatorial i/o configuration for complex mode - syn=1. - ac0=1. - xor=0 defines active low output. - xor=1 defines active high output. - ac1=1. - pin 13 through pin 18 are configured to this function. combinatorial output configuration for complex mode - syn=1. - ac0=1. - xor=0 defines active low output. - xor=1 defines active high output. - ac1=1. - pin 12 and pin 19 are configured to this function. xor xor
specifications gal16v8 1996 data book 3-71 complex mode logic diagram dip & plcc package pinouts 0000 0224 0256 0480 0512 0736 0768 0992 1024 1248 1280 1504 1536 1760 1792 2016 ptd 2128 2191 11 12 13 14 15 16 17 18 19 1 2 3 4 5 6 7 8 9 olmc olmc olmc olmc olmc olmc syn-2192 ac0-2193 xor-2055 ac1-2127 xor-2054 ac1-2126 xor-2053 ac1-2125 xor-2052 ac1-2124 xor-2051 ac1-2123 xor-2050 ac1-2122 xor-2049 ac1-2121 xor-2048 ac1-2120 olmc olmc 28 24 20 16 12 8 4 0
specifications gal16v8 1996 data book 3-72 simple mode in the simple mode, macrocells are configured as dedicated inputs or as dedicated, always active, combinatorial outputs. architecture configurations available in this mode are similar to the common 10l8 and 12p6 devices with many permutations of generic output polarity or input choices. all outputs in the simple mode have a maximum of eight product terms that can control the logic. in addition, each output has pro- grammable polarity. pins 1 and 11 are always available as data inputs into the and array. the center two macrocells (pins 15 & 16) cannot be used as input or i/o pins, and are only available as dedicated outputs. the jedec fuse numbers including the ues fuses and ptd fuses are shown on the logic diagram. combinatorial output with feedback configuration for simple mode - syn=1. - ac0=0. - xor=0 defines active low output. - xor=1 defines active high output. - ac1=0 defines this configuration. - all olmc except pins 15 & 16 can be configured to this function. combinatorial output configuration for simple mode - syn=1. - ac0=0. - xor=0 defines active low output. - xor=1 defines active high output. - ac1=0 defines this configuration. - pins 15 & 16 are permanently configured to this function. dedicated input configuration for simple mode - syn=1. - ac0=0. - xor=0 defines active low output. - xor=1 defines active high output. - ac1=1 defines this configuration. - all olmc except pins 15 & 16 can be configured to this function. note: the development software configures all of the architecture control bits and checks for proper pin usage automatically. vcc xor vcc xor
specifications gal16v8 1996 data book 3-73 simple mode logic diagram dip & plcc package pinouts 1 11 12 13 14 15 16 17 18 19 2 3 4 5 6 7 9 0000 0224 0256 0480 0512 0736 0768 0992 1024 1248 1280 1504 1536 1760 1792 2016 ptd 2128 2191 8 xor-2048 ac1-2120 olmc xor-2049 ac1-2121 xor-2050 ac1-2122 xor-2051 ac1-2123 xor-2052 ac1-2124 xor-2053 ac1-2125 xor-2054 ac1-2126 xor-2055 ac1-2127 olmc olmc olmc olmc olmc olmc olmc syn-2192 ac0-2193 28 24 20 16 12 8 4 0
specifications gal16v8 1996 data book 3-74 specifications gal16v8c v il input low voltage vss C 0.5 0.8 v v ih input high voltage 2.0 vcc+1 v i il 1 input or i/o low leakage current 0v v in v il (max.) C100 m a i ih input or i/o high leakage current 3.5 v v in v cc 10 m a v ol output low voltage i ol = max. v in = v il or v ih 0.5 v v oh output high voltage i oh = max. v in = v il or v ih 2.4 v i ol low level output current 16 ma i oh high level output current C3.2 ma i os 2 output short circuit current v cc = 5v v out = 0.5v t a = 25 c C30 C150 ma absolute maximum ratings (1) recommended operating cond. commercial devices: ambient temperature (t a ) ............................... 0 to 75 c supply voltage (v cc ) with respect to ground ..................... +4.75 to +5.25v supply voltage v cc ....................................... C0.5 to +7v input voltage applied .......................... C2.5 to v cc +1.0v off-state output voltage applied .......... C2.5 to v cc +1.0v storage temperature ................................. C65 to 150 c ambient temperature with power applied ........................................ C55 to 125 c 1.stresses above those listed under the absolute maximum ratings may cause permanent damage to the device. these are stress only ratings and functional operation of the device at these or at any other conditions above those indicated in the operational sections of this specification is not implied (while programming, follow the programming specifications). dc electrical characteristics over recommended operating conditions (unless otherwise specified) symbol parameter condition min. typ. 3 max. units commercial i cc operating power v il = 0.5v v ih = 3.0v l -5/-7 75 115 ma supply current f toggle = 15mhz outputs open industrial i cc operating power v il = 0.5v v ih = 3.0v l -7 75 130 ma supply current f toggle = 15mhz outputs open 1) the leakage current is due to the internal pull-up resistor on all pins. see input buffer section for more information. 2) one output at a time for a maximum duration of one second. vout = 0.5v was selected to avoid test problems caused by tester ground degradation. guaranteed but not 100% tested. 3) typical values are at vcc = 5v and t a = 25 c industrial devices: ambient temperature (t a ) ...........................C40 to 85 c supply voltage (v cc ) with respect to ground ..................... +4.50 to +5.50v
specifications gal16v8 1996 data book 3-75 specifications gal16v8c ac switching characteristics over recommended operating conditions -7 min. max. -7 min. max. t pd a input or i/o to 8 outputs switching 1 5 3 7.5 1 7.5 ns comb. output 1 output switching 7 ns t co a clock to output delay 1 4 2 515ns t cf 2 clock to feedback delay 3 3 3 ns t su setup time, input or feedback before clock - 3 77ns t h hold time, input or feedback after clock - 0 00ns a maximum clock frequency with 142.8 83.3 83.3 mhz external feedback, 1/(tsu + tco) f max 3 a maximum clock frequency with 166 100 100 mhz internal feedback, 1/(tsu + tcf) a maximum clock frequency with 166 100 100 mhz no feedback t wh clock pulse duration, high 3 5 5ns t wl clock pulse duration, low 3 5 5ns t en b input or i/o to output enabled 1 6 3 919ns b oe to output enabled 1 6 2 616ns t dis c input or i/o to output disabled 1 5 2 919ns c oe to output disabled 1 5 1.5 616ns units parameter test cond 1 . description ind com com -5 min. max. 1) refer to switching test conditions section. 2) calculated from f max with internal feedback. refer to fmax descriptions section. 3) refer to fmax descriptions section. characterized initially and after any design or process changes that may affect these parameters. capacitance (t a = 25 c, f = 1.0 mhz) symbol parameter maximum* units test conditions c i input capacitance 8 pf v cc = 5.0v, v i = 2.0v c i/o i/o capacitance 8 pf v cc = 5.0v, v i/o = 2.0v *guaranteed but not 100% tested.
specifications gal16v8 1996 data book 3-76 specifications gal16v8b industrial i cc operating power v il = 0.5v v ih = 3.0v l -10/-15/-25 75 130 ma supply current f toggle = 15mhz outputs open q -20/-25 45 65 ma commercial i cc operating power v il = 0.5v v ih = 3.0v l -7/-10 75 115 ma supply current f toggle = 15mhz outputs open l -15/-25 75 90 ma q -15/-25 45 55 ma absolute maximum ratings (1) recommended operating cond. commercial devices: ambient temperature (t a ) ............................... 0 to 75 c supply voltage (v cc ) with respect to ground ..................... +4.75 to +5.25v supply voltage v cc ....................................... C0.5 to +7v input voltage applied .......................... C2.5 to v cc +1.0v off-state output voltage applied .......... C2.5 to v cc +1.0v storage temperature ................................. C65 to 150 c ambient temperature with power applied ........................................ C55 to 125 c 1.stresses above those listed under the absolute maximum ratings may cause permanent damage to the device. these are stress only ratings and functional operation of the device at these or at any other conditions above those indicated in the operational sections of this specification is not implied (while programming, follow the programming specifications). industrial devices: ambient temperature (t a ) ...........................C40 to 85 c supply voltage (v cc ) with respect to ground ..................... +4.50 to +5.50v dc electrical characteristics over recommended operating conditions (unless otherwise specified) symbol parameter condition min. typ. 3 max. units v il input low voltage vss C 0.5 0.8 v v ih input high voltage 2.0 vcc+1 v i il 1 input or i/o low leakage current 0v v in v il (max.) C 100 m a i ih input or i/o high leakage current 3.5 v v in v cc 10 m a v ol output low voltage i ol = max. v in = v il or v ih 0.5 v v oh output high voltage i oh = max. v in = v il or v ih 2.4 v i ol low level output current 24 ma i oh high level output current C3.2 ma i os 2 output short circuit current v cc = 5v v out = 0.5v t a = 25 c C30 C150 ma 1) the leakage current is due to the internal pull-up resistor on all pins. see input buffer section for more information. 2) one output at a time for a maximum duration of one second. vout = 0.5v was selected to avoid test problems caused by tester ground degradation. guaranteed but not 100% tested. 3) typical values are at vcc = 5v and t a = 25 c
specifications gal16v8 1996 data book 3-77 specifications gal16v8b ac switching characteristics over recommended operating conditions t pd a input or i/o to 8 outputs switching 3 7.5 3 10 3 15 3 20 3 25 ns comb. output 1 output switching 7 ns t co a clock to output delay 2 5 2 7 2 10 2 11 2 12 ns t cf 2 clock to feedback delay 3 6 8 9 10 ns t su setup time, input or fdbk before clk - 7 10 12 13 15 ns t h hold time, input or fdbk after clk - 0 0 0 0 0 ns a maximum clock frequency with 83.3 58.8 45.5 41.6 37 mhz external feedback, 1/(tsu + tco) f max 3 a maximum clock frequency with 100 62.5 50 45.4 40 mhz internal feedback, 1/(tsu + tcf) a maximum clock frequency with 100 62.5 62.5 50 41.6 mhz no feedback t wh clock pulse duration, high 5 8 8 10 12 ns t wl clock pulse duration, low 5 8 8 10 12 ns t en b input or i/o to output enabled 3 9 3 10 15 20 25 ns b oe to output enabled 2 6 2 10 15 18 20 ns t dis c input or i/o to output disabled 2 9 2 10 15 20 25 ns c oe to output disabled 1.5 6 1.5 10 15 18 20 ns units 1) refer to switching test conditions section. 2) calculated from f max with internal feedback. refer to fmax descriptions section. 3) refer to fmax descriptions section. -25 min. max. -20 min. max. -15 min. max. -10 min. max. param. description test cond 1 . -7 min. max. capacitance (t a = 25 c, f = 1.0 mhz) symbol parameter maximum* units test conditions c i input capacitance 8 pf v cc = 5.0v, v i = 2.0v c i/o i/o capacitance 8 pf v cc = 5.0v, v i/o = 2.0v *guaranteed but not 100% tested. com com / ind com / ind ind com / ind
specifications gal16v8 1996 data book 3-78 switching waveforms registered output combinatorial output oe to output enable/disable input or i/o to output enable/disable f max with feedback clock width combinational output valid input input or i/o feedback t pd combinational output input or i/o feedback t en t dis clk (w/o fb) 1/ f max t wl t wh input or i/o feedback registered output clk valid input (external fdbk) t su t co t h 1/ f max oe registered output t en t dis clk registered feedback t cf t su 1/ f max (internal fdbk)
specifications gal16v8 1996 data book 3-79 fmax descriptions f max with internal feedback 1/( t su+ t cf) note: t cf is a calculated value, derived by subtracting t su from the period of fmax w/internal feedback ( t cf = 1/ f max - t su). the value of t cf is used primarily when calculating the delay from clocking a register to a combinatorial output (through registered feedback), as shown above. for example, the timing from clock to a combinatorial output is equal to t cf + t pd. f max with external feedback 1/( t su+ t co) note: f max with external feedback is calculated from measured t su and t co. f max with no feedback note: f max with no feedback may be less than 1/( t wh + t wl). this is to allow for a clock duty cycle of other than 50%. switching test conditions register logic array clk t su + t h register logic array t co t su clk gal16v8c output load conditions (see figure) test condition r 1 r 2 c l a 200 w 200 w 50pf b active high 200 w 50pf active low 200 w 200 w 50pf c active high 200 w 5pf active low 200 w 200 w 5pf gal16v8b output load conditions (see figure) test condition r 1 r 2 c l a 200 w 390 w 50pf b active high 390 w 50pf active low 200 w 390 w 50pf c active high 390 w 5pf active low 200 w 390 w 5pf input pulse levels gnd to 3.0v input rise and gal16v8b 2 C 3ns 10% C 90% fall times gal16v8c 1.5ns 10% C 90% input timing reference levels 1.5v output timing reference levels 1.5v output load see figure 3-state levels are measured 0.5v from steady-state active level. test point c * l from output (o/q) under test +5v *c l includes test fixture and probe capacitance r 2 r 1 clk register logic array t cf t pd
specifications gal16v8 1996 data book 3-80 electronic signature an electronic signature is provided in every gal16v8 device. it contains 64 bits of reprogrammable memory that can contain user defined data. some uses include user id codes, revision num- bers, or inventory control. the signature data is always available to the user independent of the state of the security cell. note: the electronic signature is included in checksum calcu- lations. changing the electronic signature will alter the checksum. security cell a security cell is provided in the gal16v8 devices to prevent un- authorized copying of the array patterns. once programmed, this cell prevents further read access to the functional bits in the de- vice. this cell can only be erased by re-programming the device, so the original configuration can never be examined once this cell is programmed. the electronic signature is always available to the user, regardless of the state of this control cell. latch-up protection gal16v8 devices are designed with an on-board charge pump to negatively bias the substrate. the negative bias minimizes the potential of latch-up caused by negative input undershoots. additionally, outputs are designed with n-channel pull-ups instead of the traditional p-channel pull-ups in order to eliminate latch-up due to output overshoots. device programming gal devices are programmed using a lattice semiconductor- approved logic programmer, available from a number of manu- facturers. complete programming of the device takes only a few seconds. erasing of the device is transparent to the user, and is done automatically as part of the programming cycle. output register preload when testing state machine designs, all possible states and state transitions must be verified in the design, not just those required in the normal machine operations. this is because, in system operation, certain events occur that may throw the logic into an illegal state (power-up, line voltage glitches, brown-outs, etc.). to test a design for proper treatment of these conditions, a way must be provided to break the feedback paths, and force any desired (i.e., illegal) state into the registers. then the machine can be sequenced and the outputs tested for correct next state conditions. gal16v8 devices include circuitry that allows each registered output to be synchronously set either high or low. thus, any present state condition can be forced for test sequencing. if necessary, approved gal programmers capable of executing text vectors perform output register preload automatically. input buffers gal16v8 devices are designed with ttl level compatible input buffers. these buffers have a characteristically high impedance, and present a much lighter load to the driving logic than bipolar ttl devices. the gal16v8 input and i/o pins have built-in active pull-ups. as a result, unused inputs and i/o's will float to a ttl "high" (logi- cal "1"). lattice semiconductor recommends that all unused inputs and tri-stated i/o pins be connected to another active input, v cc , or ground. doing this will tend to improve noise immunity and reduce i cc for the device. typical input pull-up characteristic 1.0 2.0 3.0 4.0 5.0 -60 0 -20 -40 0 input voltage (volts) input current (ua)
specifications gal16v8 1996 data book 3-81 typ. vref = 3.2v typical output typ. vref = 3.2v typical input input/output equivalent schematics power-up reset circuitry within the gal16v8 provides a reset signal to all reg- isters during power-up. all internal registers will have their q outputs set low after a specified time ( t pr, 1 m s max). as a result, the state on the registered output pins (if they are enabled) will always be high on power-up, regardless of the programmed polarity of the output pins. this feature can greatly simplify state machine design by providing a known state on power-up. be- cause of the asynchronous nature of system power-up, some vcc pin vcc vref active pull-up circuit esd protection circuit esd protection circuit vcc pin vcc pin vref tri-state control active pull-up circuit feedback (to input buffer) pin feedback data output vcc clk internal register q - output feedback/external output register vcc (min.) t pr internal register reset to logic "0" device pin reset to logic "1" t wl t su conditions must be met to guarantee a valid power-up reset of the device. first, the v cc rise must be monotonic. second, the clock input must be at static ttl level as shown in the diagram during power up. the registers will reset within a maximum of t pr time. as in normal system operation, avoid clocking the device until all input and feedback path setup times have been met. the clock must also meet the minimum pulse width requirements.
specifications gal16v8 1996 data book 3-82 gal 16v8c-5/-7: typical ac and dc characteristic diagrams delta tpd vs # of outputs switching number of outputs switching delta tpd (ns) -1 -0.75 -0.5 -0.25 0 12345678 rise fall delta tco vs # of outputs switching number of outputs switching delta tco (ns) -1 -0.75 -0.5 -0.25 0 12345678 rise fall delta tpd vs output loading output loading (pf) delta tpd (ns) -2 0 2 4 6 8 0 50 100 150 200 250 300 rise fall delta tco vs output loading output loading (pf) delta tco (ns) -2 0 2 4 6 8 0 50 100 150 200 250 300 rise fall normalized tpd vs vcc supply voltage (v) normalized tpd 0.8 0.9 1 1.1 1.2 4.50 4.75 5.00 5.25 5.50 pt h->l pt l->h normalized tco vs vcc supply voltage (v) normalized tco 0.8 0.9 1 1.1 1.2 4.50 4.75 5.00 5.25 5.50 rise fall normalized tsu vs vcc supply voltage (v) normalized tsu 0.8 0.9 1 1.1 1.2 4.50 4.75 5.00 5.25 5.50 pt h->l pt l->h normalized tpd vs temp temperature (deg. c) normalized tpd 0.7 0.8 0.9 1 1.1 1.2 1.3 -55 -25 0 25 50 75 100 125 pt h->l pt l->h normalized tco vs temp temperature (deg. c) normalized tco 0.7 0.8 0.9 1 1.1 1.2 1.3 -55 -25 0 25 50 75 100 125 rise fall normalized tsu vs temp temperature (deg. c) normalized tsu 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 -55 -25 0 25 50 75 100 125 pt h->l pt l->h
specifications gal16v8 1996 data book 3-83 gal 16v8c-5/-7: typical ac and dc characteristic diagrams vol vs iol iol (ma) vol (v) 0 0.5 1 1.5 2 0.00 20.00 40.00 60.00 80.00 voh vs ioh ioh(ma) voh (v) 0 1 2 3 4 5 0.00 10.00 20.00 30.00 40.00 50.00 voh vs ioh ioh(ma) voh (v) 3.25 3.5 3.75 4 4.25 0.00 1.00 2.00 3.00 4.00 normalized icc vs vcc supply voltage (v) normalized icc 0.80 0.90 1.00 1.10 1.20 4.50 4.75 5.00 5.25 5.50 normalized icc vs temp temperature (deg. c) normalized icc 0.8 0.9 1 1.1 1.2 1.3 -55 -25 0 25 50 75 100 125 normalized icc vs freq. frequency (mhz) normalized icc 0.80 0.90 1.00 1.10 1.20 1.30 1.40 1.50 0 25 50 75 100 delta icc vs vin (1 input) vin (v) delta icc (ma) 0 2 4 6 8 10 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 input clamp (vik) vik (v) iik (ma) 0 5 10 15 20 25 30 35 40 45 -2.00 -1.50 -1.00 -0.50 0.00
specifications gal16v8 1996 data book 3-84 gal 16v8b-7/-10: typical ac and dc characteristic diagrams normalized tpd vs vcc supply voltage (v) normalized tpd 0.8 0.9 1 1.1 1.2 4.50 4.75 5.00 5.25 5.50 pt h->l pt l->h normalized tco vs vcc supply voltage (v) normalized tco 0.8 0.9 1 1.1 1.2 4.50 4.75 5.00 5.25 5.50 rise fall normalized tsu vs vcc supply voltage (v) normalized tsu 0.8 0.9 1 1.1 1.2 4.50 4.75 5.00 5.25 5.50 pt h->l pt l->h normalized tpd vs temp temperature (deg. c) normalized tpd 0.7 0.8 0.9 1 1.1 1.2 1.3 -55 -25 0 25 50 75 100 125 pt h->l pt l->h normalized tco vs temp temperature (deg. c) normalized tco 0.7 0.8 0.9 1 1.1 1.2 1.3 -55 -25 0 25 50 75 100 125 rise fall normalized tsu vs temp temperature (deg. c) normalized tsu 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 -55 -25 0 25 50 75 100 125 pt h->l pt l->h delta tpd vs # of outputs switching number of outputs switching delta tpd (ns) -2 -1.5 -1 -0.5 0 12345678 rise fall delta tco vs # of outputs switching number of outputs switching delta tco (ns) -2 -1.5 -1 -0.5 0 12345678 rise fall delta tpd vs output loading output loading (pf) delta tpd (ns) -2 0 2 4 6 8 10 0 50 100 150 200 250 300 rise fall delta tco vs output loading output loading (pf) delta tco (ns) -2 0 2 4 6 8 10 0 50 100 150 200 250 300 rise fall
specifications gal16v8 1996 data book 3-85 gal 16v8b-7/-10: typical ac and dc characteristic diagrams vol vs iol iol (ma) vol (v) 0 0.25 0.5 0.75 1 0.00 20.00 40.00 60.00 80.00 100.00 voh vs ioh ioh(ma) voh (v) 0 1 2 3 4 5 0.00 10.00 20.00 30.00 40.00 50.00 60.00 voh vs ioh ioh(ma) voh (v) 3.5 3.75 4 4.25 4.5 0.00 1.00 2.00 3.00 4.00 normalized icc vs vcc supply voltage (v) normalized icc 0.80 0.90 1.00 1.10 1.20 4.50 4.75 5.00 5.25 5.50 normalized icc vs temp temperature (deg. c) normalized icc 0.8 0.9 1 1.1 1.2 -55 -25 0 25 50 75 100 125 normalized icc vs freq. frequency (mhz) normalized icc 0.80 0.90 1.00 1.10 1.20 1.30 0 25 50 75 100 delta icc vs vin (1 input) vin (v) delta icc (ma) 0 2 4 6 8 10 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 input clamp (vik) vik (v) iik (ma) 0 10 20 30 40 50 60 70 80 90 100 -2.00 -1.50 -1.00 -0.50 0.00
specifications gal16v8 1996 data book 3-86 gal 16v8b-15/-25: typical ac and dc characteristic diagrams normalized tpd vs vcc supply voltage (v) normalized tpd 0.8 0.9 1 1.1 1.2 4.50 4.75 5.00 5.25 5.50 pt h->l pt l->h normalized tco vs vcc supply voltage (v) normalized tco 0.8 0.9 1 1.1 1.2 4.50 4.75 5.00 5.25 5.50 rise fall normalized tsu vs vcc supply voltage (v) normalized tsu 0.8 0.9 1 1.1 1.2 4.50 4.75 5.00 5.25 5.50 pt h->l pt l->h normalized tpd vs temp temperature (deg. c) normalized tpd 0.7 0.8 0.9 1 1.1 1.2 1.3 -55 -25 0 25 50 75 100 125 pt h->l pt l->h normalized tco vs temp temperature (deg. c) normalized tco 0.7 0.8 0.9 1 1.1 1.2 1.3 -55 -25 0 25 50 75 100 125 rise fall normalized tsu vs temp temperature (deg. c) normalized tsu 0.7 0.8 0.9 1 1.1 1.2 1.3 1.4 -55 -25 0 25 50 75 100 125 pt h->l pt l->h delta tpd vs # of outputs switching number of outputs switching delta tpd (ns) -2 -1.5 -1 -0.5 0 12345678 rise fall delta tco vs # of outputs switching number of outputs switching delta tco (ns) -2 -1.5 -1 -0.5 0 12345678 rise fall delta tpd vs output loading output loading (pf) delta tpd (ns) -2 0 2 4 6 8 10 12 0 50 100 150 200 250 300 rise fall delta tco vs output loading output loading (pf) delta tco (ns) -2 0 2 4 6 8 10 12 0 50 100 150 200 250 300 rise fall
specifications gal16v8 1996 data book 3-87 gal 16v8b-15/-25: typical ac and dc characteristic diagrams vol vs iol iol (ma) vol (v) 0 0.5 1 1.5 2 0.00 20.00 40.00 60.00 80.00 100.00 voh vs ioh ioh(ma) voh (v) 0 1 2 3 4 5 0.00 10.00 20.00 30.00 40.00 50.00 60.00 voh vs ioh ioh(ma) voh (v) 3.25 3.5 3.75 4 4.25 0.00 1.00 2.00 3.00 4.00 normalized icc vs vcc supply voltage (v) normalized icc 0.80 0.90 1.00 1.10 1.20 4.50 4.75 5.00 5.25 5.50 normalized icc vs temp temperature (deg. c) normalized icc 0.8 0.9 1 1.1 1.2 -55 -25 0 25 50 75 100 125 normalized icc vs freq. frequency (mhz) normalized icc 0.80 0.90 1.00 1.10 1.20 1.30 1.40 0 25 50 75 100 delta icc vs vin (1 input) vin (v) delta icc (ma) 0 2 4 6 8 10 12 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00 input clamp (vik) vik (v) iik (ma) 0 10 20 30 40 50 60 70 80 90 100 -2.00 -1.50 -1.00 -0.50 0.00

▲Up To Search▲

Price & Availability of GAL16V8B-5LPI

	To Download GAL16V8B-5LPI Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .